Texas Instruments' ISO7830/31/10/10F are high-performance, reinforced single- and triple-channel digital isolators with an 8000 VPK isolation voltage.
By Texas Instruments 719
Texas Instruments' DP83867 is a physical layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX, and 1000BASE-T Ethernet protocols.
By Texas Instruments 747
Texas Instruments' ISO5452 is an isolated gate driver for IGBTs and MOSFETs with split outputs, OUTH and OUTL, providing 2.5 A source and 5 A sink current.
By Texas Instruments 1302
Texas Instruments' LM74670-Q1 is a controller device that can be used with an N-channel MOSFET in full or half bridge rectifier architectures for alternators.
By Texas Instruments 922
Texas Instruments' SN6505 are low-noise, 1 A, low-EMI, push-pull transformer drivers, specifically designed for small form factor, isolated power supplies.
By Texas Instruments 775
Texas Instruments' TPS7A88 is a dual, low-noise (3.8 µVRMS), LDO voltage regulator capable of sourcing 1 A per channel with only 200 mV of maximum dropout.
By Texas Instruments 1169
TI’s TPS709xx series are ultra-low quiescent current devices designed for power-sensitive applications and are available in WSON-6 and SOT-23-5 packages.
By Texas Instruments 706
Texas Instruments' TPS61220 0.7 V boost converters are offered in a 6-pin SC-70 package (DCK) measuring 2 mm x 2 mm to enable small circuit layout size.
By Texas Instruments 710
Texas Instruments' MSP430 family of microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications.
By Texas Instruments 815
Texas Instruments' AFE4400 is a fully integrated analog front-end (AFE) suited for pulse oximeter applications and is a very configurable timing controller.
By Texas Instruments 882
Texas Instruments' bq78z100 Impedance Track™ gas gauge for 1-series to 2-series Li-ion/Li-polymer battery packs.
By Texas Instruments 814
Texas Instruments' bq28z610 Impedance Track™ gas gauges and protection solutions for 1-series to 2-series cell Li-ion battery packs.
By Texas Instruments 830
Texas Instruments' CSD95377Q4M NexFET™ power stage used in a high power, high-density synchronous buck converter in a small 3.5 mm x 4.5 mm outline package.
By Texas Instruments 675
Texas Instruments' DAC8562T device is a low-power, voltage-output, dual-channel, 16-bit digital-to-analog converter (DAC) in VSSOP-10 and WSON-10 packages.
By Texas Instruments 1164
Texas Instruments' ADS9110 is an 18-bit, 2 MSPS, SAR ADC with ±0.5 LSB INL and 100 dB SNR specifications under typical operating conditions in a VQFN package.
By Texas Instruments 1798
Texas Instruments' ADC344x are a high-linearity, ultra-low power, quad-channel, 14-bit, 25 MSPS to 125 MSPS, analog-to-digital converter (ADC) family.
By Texas Instruments 928
Texas Instruments' ADC342x are a high-linearity, ultra-low power, quad-channel, 12-bit, 25 MSPS to 125 MSPS, analog-to-digital converter (ADC) family.
By Texas Instruments 1125
Texas Instruments' TPS65986 is a USB Type-C and power delivery (PD) controller providing cable plug and orientation detection at the USB Type-C connector.
By Texas Instruments 811
Texas Instruments' TUSB321AI allows USB Type-C ports with the configuration channel logic needed for Type-C ecosystems and operates over a wide supply range.
By Texas Instruments 1146
Texas Instruments' TPS62097 are synchronous step-down converters optimized for high efficiency and noise critical applications in a 2 mm x 2 mm VQFN package.
By Texas Instruments 778