SparkFun’s Mooshimeter is able to safely measure 600 V at 10 A with 24-bit resolution from up to 50 meters away making multi-channel measurements possible.
By SparkFun Electronics 64
The SparkFun Raspberry Pi Zero W camera kit provides a pan/tilt camera controlled via a Raspberry Pi Zero W.
By SparkFun Electronics 53
SparkFun's ADXL345 is a small, thin, low-power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to ±16 g.
By SparkFun Electronics 45
SparkFun's SEN-12670 3-axis accelerometer, and Freescale’s MAG3110 3-axis magnetometer, produce orientation independent accurate compass heading information.
SparkFun combines its CCS811 breakout board with ams' ultra-low power digital gas sensor for battery and wearable applications.
By SparkFun Electronics 35
SparkFun's SEN-14348 CCS811/BME280 combo breakout provides environmental data including barometric pressure, humidity, temp, TVOCs, and CO2 (or eCO2) levels.
By SparkFun Electronics 34
The SparkFun RedBoard combines the simplicity of the UNO’s Optiboot bootloader, the stability of the FTDI and the R3 shield compatibility of the latest Arduino UNO R3.
By SparkFun Electronics 41
SparkFun’s FreeSoC2 development board features two Cortex-M3 processor cores which are the CY8C5868LTI-LP039 and the CY8C5888AXI-LP096.
By SparkFun Electronics 50
SparkFun's ESP32 Thing development board is a fully encompassing development board with everything necessary to program, run, and develop a connected project.
By SparkFun Electronics 54
SparkFun offers PJRC's Teensy 3.6 development boards which feature a 180 MHz ARM® Cortex®-M4 with floating point unit and a Kinetis K66 microcontroller.
By SparkFun Electronics 33
SparkFun offers PJRC's Teensy 3.5 development boards which feature a 120 MHz ARM® Cortex®-M4 with floating point unit and a Kinetis K64F microcontroller.
By SparkFun Electronics 46
The world's first breadboard with an Arduino compatible built-in and Arduino shield, LEGO® brick, and native USB support from Sparkfun.
By SparkFun Electronics 55
At its heart, the SparkFun RedBoard Turbo uses the ATSAMD21G18 MCU, which is an Arm® Cortex®-M0+ 32-bit microcontroller that can run up to 48 MHz.
By SparkFun Electronics 47
SparkFun's Blynk board is specially designed to work with the ‘widgets’ within the Blynk mobile app to quickly and easily create your next IoT project.
By SparkFun Electronics 49
SparkFun's nRF52832 breakout provides easy access to all of the chip's features. It breaks out all of the nRF52's I/O pins, provides a 32.768 kHz RTC crystal, a user-programmable butto
By SparkFun Electronics 40
SparkFun's Big Easy Driver is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip.
By SparkFun Electronics 36
SparkFun’s Cerberus USB cable has the standard A-type connector at one end and at the other end are three common USB connectors: B, mini-B, and micro-B.
SparkFun’s Edison open power starter pack the user will be able to snap three basic "blocks" to their Edison to turn it into a modular Linux computer.