Texas Instruments' OPAx192 family is a new generation of 36 V, e-trim operational amplifiers.
By Texas Instruments 712
Texas Instruments' LM2775 switched-capacitor 5 V boost converter produces a low-noise output voltage.
By Texas Instruments 611
Texas Instruments' TUSB320 enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems.
By Texas Instruments 699
Texas Instruments' TPS53647 is a 4-phase, D-CAP+™ step-down buck controller with NVM and PMBus interface for ASIC
By Texas Instruments 812
Texas Instruments TPS92512/13 is a step-down (buck) current regulator LED driver with integrated analog current adjust.
By Texas Instruments 812
Texas Instruments' MSP430FR6972 is a 16 MHz, ultra-low-power MCU featuring 64 KB FRAM, 2 KB SRAM, 51 IO, ADC12, LCD, AES.
By Texas Instruments 795
Texas Instruments' TPA3140D2 is an inductor-free stereo (BTL), 10 W, Class-D audio amplifier with ultra-low EMI and auto gain limiter.
By Texas Instruments 786
TI's LM2776 CMOS charge-pump voltage converter inverts a positive voltage in the range of 2.7 to 5.5 V to the corresponding negative voltage.
By Texas Instruments 916
Texas Instruments' LDC1101 1.8 V, high-resolution, high-speed inductance-to-digital converter with dual inductive measurement cores.
By Texas Instruments 769
Texas Instruments' AMC1304L05 is a reinforced isolated high-precision modulator with LDO regulator, ±50 mV input and LVDS interface.
By Texas Instruments 750
Texas Instruments' offers its bq40z50 1-, 2-, 3-, and 4-series Li-ion battery pack manager, battery fuel (gas) gauge.
By Texas Instruments 826
Texas Instruments’ HD3SS3212 is a bidirectional passive switch in mux or demux configurations that can work for any high-speed interface applications.
By Texas Instruments 759
Texas Instruments' bq296xyz family is a high accuracy, low power overvoltage protector with a 1 mA regulated output supply for Li-Ion battery pack applications.
By Texas Instruments 613
Texas Instruments' AFE4404 is for optical bio-sensing applications, such as heart-rate monitoring (HRM) and saturation of peripheral capillary oxygen (SpO2).
By Texas Instruments 894
Texas Instruments' TUSB211 USB high-speed (HS) signal conditioner, is compatible with USB 2.0, OTG 2.0, and BC 1.2 and qualified for automotive applications.
By Texas Instruments 828
Texas Instruments' ISO5851 is a reinforced isolated gate driver for IGBTs and MOSFETs with 2.5 A source and 5 A sink current in a 16-pin SOIC package.
By Texas Instruments 968
Texas Instruments' UCC27714 is a 600 V high- and low-side gate driver with 4 A source and sink current capability, targeted to drive power MOSFETs or IGBTs.
By Texas Instruments 717
Texas Instruments' TPS6305x family of devices are buck-boost converters, suitable for applications where the input voltage is higher or lower than the output.
By Texas Instruments 494
Texas Instruments' CSD87334Q3D NexFET™ power block is an optimized design for synchronous buck and boost applications in a small 3.3 mm × 3.3 mm outline.
By Texas Instruments 583
Texas Instruments' CSD19537Q3 100 V, 12.1 mΩ, SON 3.3 mm × 3.3 mm NexFET™ power MOSFET is designed to minimize losses in power conversion applications.
By Texas Instruments 631