Texas Instruments' INA4181A1 is a 26 V, common-mode, current-sensing amplifier used in low-side and high-side configurations.
By Texas Instruments 622
Texas Instruments' MUX36S08 is an 8-channel, single-ended, analog multiplexer that works well with dual, single, and symmetric supplies.
By Texas Instruments 873
Texas Instruments' ISO224EVM is an evaluation and development kit for the ISO224 precision isolation amplifier for use in industrial applications.
By Texas Instruments 937
TI's SN74AUP1G24 low-power single buffer is for partial-power-down applications and contains one inverter gate device with active low output enable control.
By Texas Instruments 775
Texas Instruments' 16 MHz MSP-EXP430FR2433 device features an MSP430FR2433 16-bit MCU and EnergyTrace™ technology.
By Texas Instruments 832
Texas Instruments’ LM5150-Q1 is a wide input range automatic boost controller suitable for use as a pre-boost converter.
By Texas Instruments 536
Texas Instruments' UCC28780 is an adaptive zero voltage switching active-clamp flyback controller that complies with stringent global efficiency standards.
By Texas Instruments 685
TI's DAC874xH modem integrates several broadly used industrial protocols and offer a wide temperature range, low quiescent current, and small package sizes.
By Texas Instruments 853
TI's LMK05028 network synchronizer clock features four reference inputs, two independent PLL channels, and eight output clocks with RMS phase jitter.
By Texas Instruments 855
Texas Instruments' ADS7142 is a nanopower, dual-channel, programmable sensor monitor suitable for space-constrained and battery-powered applications.
By Texas Instruments 1578
TI's THVD1450 consists of half-duplex and full-duplex RS-485 transceivers used for asynchronous data transmissions available in two speed grades.
By Texas Instruments 712
Texas Instruments' three-phase, smart gate driver offers a wide range of integrated protecting features along with high-level device integration.
By Texas Instruments 898
TI's LMV358 low-voltage, rail-to-rail output, operational amplifier can be operated as a single-supply or dual-supply amplifier for a variety of applications.
By Texas Instruments 626
TI's OPT3101 ToF-based analog front-end (AFE) features an integrated illumination driver for measuring distance and can support very high ambient conditions.
By Texas Instruments 1462
Texas Instruments' TLV6700 and TLV6710 micropower window comparators each consist of two comparators for overvoltage and undervoltage detection.
By Texas Instruments 765
Texas Instruments' TLV7081 nanopower micropackage comparator features an open-drain output stage that is well suited for monitoring battery voltages.
By Texas Instruments 710
Texas Instruments' DAC38RF82 is a high-performance, dual-channel DAC with a low power JESD204B interface and optional low jitter PLL/VCO.
By Texas Instruments 608
Texas Instruments' TLV6703 and TLV6713 are high-voltage comparators with broad voltage thresholds suitable for a wide array of applications.
By Texas Instruments 571
TI's 2N7001T signal converter is suitable for level-translation applications for interfacing between devices that operate at different interface voltages.
By Texas Instruments 1020
TI's OPA2810 dual-channel op amp can source and sink large amounts of current without degradation in its linearity performance in suitable applications.
By Texas Instruments 873