Infineon's CoolMOS Power MOSFET product family in 700 V sets a benchmark in superjunction technologies and combines best-in-class performance.
By Infineon Technologies 1617
Texas Instruments' bq35100 battery monitor provides gas gauging for lithium thionyl chloride (LiSOCl2) and lithium manganese dioxide (LiMnO2) primary batteries.
By Texas Instruments 821
Texas Instruments' CSD17581Q3A N-channel NexFET™ power MOSFET is designed for applications such as motor control and optimized for control FET.
By Texas Instruments 1126
Richtek's RT4805A synchronous boost regulator is designed to provide a minimum output voltage from a single-cell Li-Ion battery and is available in the WL-CSP-16B 1.67 x1.67 (BSC) package.
By Richtek USA Inc 991
ROHM Semiconductor's BD57020MWV is an integrated IC for the wireless power transmitter. ROHM Semiconductor's BD57015GWL is a stand-alone wireless power receiver IC.
By ROHM Semiconductor 888
Allegro's A6862 is an N-channel power MOSFET driver capable of controlling MOSFETs connected as a 3-phase solid state relay in phase-isolation applications.
By Allegro MicroSystems, LLC 1011
Diode's ZABG4003, ZABG6003, and ZABG6004 are low-power, programmable depletion mode FET bias controllers intended primarily for satellite low noise blocks (LNBs).
By Diodes Incorporated 616
ON Semiconductor's NCP81239 USB Power Delivery (PD) controller is a synchronous buck boost that is optimized for converting battery voltage or adapter voltage into power supply rails required
By ON Semiconductor 1050
ADI’s ADP5054 combines four high-performance buck (step-up) regulators in a small 7 mm x 7 mm 48-lead LFCSP package.
By Analog Devices Inc 630
Texas Instruments’ TPS546C23 is a PMBus 1.3 compliant 35 A, high-performance, synchronous buck converter with two integrated N-channel NexFET™ power MOSFETs.
By Texas Instruments 892
Texas Instruments' TPS3850 includes a precision voltage supervisor with both overvoltage [VIT+(OV)] and undervoltage (VIT-(UV)) thresholds.
By Texas Instruments 896
ROHM's BD7F series DC / DC converters support multi-output configuration for superior cross regulation.
By ROHM Semiconductor 878
Analog Devices’ ADP2443 is a synchronous buck DC-to-DC regulator with metal oxide semiconductor field effect transistor in a small 4 mm x 4 mm LFCSP package.
By Analog Devices Inc 650
Analog Devices' ADP7183 linear regulators are designed for regulation to noise sensitive applications and communications, and infrastructure applications.
By Analog Devices Inc 681
Analog Devices' ADP2360 DC-to-DC step-down switching regulator is designed for applications which include HART® modems and building automation.
By Analog Devices Inc 822
NXP Semiconductors' MRF1K50H RF power evaluation fixtures are ideal for applications which include ISM, mobile radio, aerospace, and broadcast.
By NXP Semiconductors 1044
Richtek's RT4813A high efficiency boost converter is designed to provide a minimum output voltage from a single-cell Li-Ion battery, even when the battery voltage is below the system minimum.
By Richtek USA Inc 1031
The XR76201, XR76203, XR76205 and XR76208 are synchronous step-down regulators combining the controller, drivers, bootstrap diode, and MOSFETs in a single package for point-of-load supplies.
By MaxLinear 1256
STMicroelectronics has extended its offering of intelligent power modules with the introduction of the MOSFET-based SLLIMM-nano devices (1 A and 2 A current rating at 25°C, with 500 V breakdo
By STMicroelectronics 1080
ON Semiconductor's NCP1399 is a high performance current mode controller for half bridge resonant converters. This controller implements 600 V gate drivers, simplifying layout and reducing ext
By ON Semiconductor 1034