Bel Fuse's 0659C (cartridge) and 0659P (pigtail leads) are lower cost, fully automated versions of the Bel 5HT 5 x 20 mm cartridge and 5 HTP pigtail lead fuse series.
By Bel Fuse Inc 940
MCC's ESD offerings provide one to six lines of protection with ultra-low-capacitance, 0.3 pF level, making them ideally suited for high speed interface protections.
By Micro Commercial Co 1282
Vishay's MLV series varistors typical applications are on-board protection of ICs and transistors, data lines and I/O ports, modems, and LCDs.
By Vishay/BCcomponents 1108
Eaton's new C308F series of fuses for use in barrier/hazardous applications that meet EN60079-11 for explosive environments in a 3 mm x 8.4 mm ceramic cartridge tube.
By Eaton-Electronics Division 1047
Semtech’s RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines.
By Semtech 1735
Vishay introduces two new bidirectional single-line ESD protection diodes in the compact SOD-323 package measuring only 1.95 mm x 1.5 mm with a low 0.95 mm profile.
By Vishay Semiconductor/Diodes Division 619
By using state-of-the-art technology, MCC's DFN package ESD offers unique protection performances with a 0.2 pf capacitance level and up to eight lines of protection in one package.
By Micro Commercial Co 1389
Bourns' G.Fast CPE protection PortNote solution provides protection for the CPE side of G.Fast signal without impairing the signal reliability.
By Bourns Inc. 800
Operating from 2.7 to 5.5 V, the Microchip AVR tiny85 offers six general purpose I/Os, a 4-channel 10-bit A/D converter, two 8-bit timers, and interrupts.
By Microchip Technology 1352
Delta, the leading global provider of power and thermal management solutions, has introduced a line of horizontal and vertical mounted power distribution units.
By Delta Electronics 1356
Phoenix Contact's TMC 8 series is comprised of 1-pole, 2-pole, and 3-pole thermal-magnetic miniature circuit breakers (MCBs) in accordance with UL 489 and EN 60947-2 for DIN rail-mounted appli
By Phoenix Contact 1585
Wurth Electronics' WE-TVSP series expands their portfolio of surge-protection components.
By Würth Elektronik 979
Littelfuse has introduced the SP4042 series TVS diode array, which are designed specifically to protect sensitive electronic equipment.
By Littelfuse Inc 1534
Two series of miniature, surface-mount, two-terminal gas discharge tubes (GDTs) from Littelfuse are designed to protect sensitive electronics from low-to-medium level lightning-induced surges and
By Littelfuse Inc 790
The SP1026 series TVS diode array from Littelfuse protects sensitive electronic equipment from damage due to electrostatic discharges (ESD). Zener diodes fabricated using a proprietary silicon ava
By Littelfuse Inc 897
Bel Fuse circuit protection chip fuse offered with their type C1H series. The fully automated C1H series, in popular 1206 SMD case size will offer the highest ampere rating to date for the package
By Bel Fuse Inc 1271
Bel Fuse announces the expansion of their circuit protection, square ceramic, surface-mount designs with the medium-blow, high-current fuse series, type 0678L.
By Bel Fuse Inc 1271
Texas Instruments' TPD1E01B04, 1-channel, ESD protection diode is designed for interfaces that include USB Type-C, Thunderbolt 3, and USB 3.1 Gen2.
By Texas Instruments 906
Littelfuse offers their space saving SP1050 series TVS diode array for POE PSE based systems with protection against threats such as lightning induced surges.
By Littelfuse Inc 655
Diodes Incorporated announces the introduction of their 400 W TVS series which is housed in the new ultra-thin, surface-mount D-FLAT package.
By Diodes Incorporated 677