Amphenol ICC's GIG-Array connector is designed to meet the needs of up to 10 Gb/s applications requiring up to 296 signal pins per connector. Amphenol ICC's long tradition as a BGA connector innovator assures expertise and reliability in the GIG-Array BGA design. The combination of multiple stack heights (15 mm to 40 mm) and multiple sizes (104, 200, and 296 signals) utilizing a 100 Ω differential matched impedance design allows for optimal design flexibility while yielding less than 1% cross-talk performance.
Amphenol ICC's patented BGA design is supported by fully automated quality-control systems featuring 100% inspections of assembly coplanarity, solder sphere size and location, as well as critical-to-function terminal component attributes. Multiple in-line vision systems, quality-control product audits, and statistical-process controls are all a part of Amphenol ICC's state-of-the-art manufacturing facility.
Features
- RoHS compliant (lead free) options are available
- Ball-grid array (BGA) termination for process friendly attachment
- 1 mm x 0.65 mm, BGA interface pitch optimizes routing and electrical performance
- Stack heights available from 15 mm to 40 mm provide mezzanine design flexibility
- Polarized design assures proper mating of the connector
- Dual-beam signal contacts provide two points of contact, increasing product reliability
- 100 Ω differential pair matched impedance assures consistent high-speed performance
- Connector sizes of 104, 200, and 296 signals providing 62 signal contacts per linear cm (158 signal contacts per linear inch) allow for optimization of board space and signal requirements
- Up to 10 Gbs/s differential pair performance
- Very low cross-talk (VLC) design of less than 1% allows for required signal-integrity performance
Applications
- Communications
- Transmission
- Access
- Switching
- Optics
- Networking
- Data
- Industrial and instrumentation
- Industrial controls and equipment
Specifications
- Housing: liquid-crystal polymer
- Contact: high-strength copper alloy
- Plating: Au, GXT®
- Durability: 25 cycles
- Contact wipe: 2.00 mm nominal
- Current rating: 1 A/contact < 30°C
- Dielectric withstanding voltage: 500 VAC
- Withstanding voltage: 167 VAC (max.)
- Low-level contact resistance:
- < 20 mΩ for 15 mm mated height
- < 31 mΩ for 28 mm mated height
- Propagation delay:
- 55 pS for 15 mm mated height
- 115 pS for 28 mm mated height
- Differential impedance: 100 ± 10%Ω
- Near-end cross-talk at 100 pS: < 3%
