 |  | | |
| PartNumber | MAX825MEUK+T | MAX825MEUK | MAX825MEXK+ |
| Description | Supervisory Circuits 5-Pin MPU Supervisor | Power Supply Support Circuit, Fixed, 1 Channel, +4.38VV, BICMOS, PDSO5 | IC SUPERVISOR |
| Manufacturer | Maxim Integrated | - | Maxim Integrated |
| Product Category | Supervisory Circuits | - | PMIC - Supervisors |
| RoHS | Y | - | - |
| Type | Voltage Supervisory | - | Simple Reset/Power-On Reset |
| Mounting Style | SMD/SMT | - | SMD/SMT |
| Package / Case | SOT-23-5 | - | - |
| Threshold Voltage | 2.5 V, 3 V, 3.3 V, 5 V | - | 2.5 V 3 V 3.3 V 5 V |
| Number of Inputs Monitored | 1 Input | - | 1 Input |
| Output Type | Active High, Active Low, Push-Pull | - | Active High Active Low Push-Pull |
| Manual Reset | Manual Reset | - | Manual Reset |
| Watchdog Timers | No Watchdog | - | No Watchdog |
| Battery Backup Switching | No Backup | - | No Backup |
| Reset Delay Time | 280 ms | - | 280 ms |
| Supply Voltage Max | 5.5 V | - | - |
| Minimum Operating Temperature | - 40 C | - | - 40 C |
| Maximum Operating Temperature | + 125 C | - | + 85 C |
| Series | MAX825M | - | MAX825M |
| Packaging | Reel | - | Tape & Reel (TR) |
| Height | 1.1 mm | - | - |
| Length | 2.9 mm | - | - |
| Width | 1.63 mm | - | - |
| Brand | Maxim Integrated | - | - |
| Overvoltage Threshold | 4.45 V | - | 4.45 V |
| Undervoltage Threshold | 4.31 V | - | 4.31 V |
| Chip Enable Signals | No Chip Enable | - | No Chip Enable |
| Operating Supply Current | 4.5 uA | - | 3 uA |
| Pd Power Dissipation | 571 mW | - | - |
| Power Fail Detection | No | - | No |
| Product Type | Supervisory Circuits | - | - |
| Factory Pack Quantity | 2500 | - | - |
| Subcategory | PMIC - Power Management ICs | - | - |
| Supply Voltage Min | 1.2 V | - | - |
| Part # Aliases | MAX825M | - | MAX825M |
| Unit Weight | 0.000222 oz | - | 0.000705 oz |
| Package Case | - | - | SC-70-5 |
| Operating Temperature | - | - | -40°C ~ 85°C (TA) |
| Mounting Type | - | - | Surface Mount |
| Supplier Device Package | - | - | SC-70-5 |
| Output | - | - | Push-Pull, Totem Pole |
| Reset | - | - | Active High/Active Low |
| Number of Voltages Monitored | - | - | 1 |
| Reset Timeout | - | - | 140 ms Minimum |
| Voltage Threshold | - | - | 4.38V |
| Pd Power Dissipation | - | - | 247 mW |
| Supply Voltage Max | - | - | 5.5 V |
| Supply Voltage Min | - | - | 1.2 V |