LTC4211IMS#PBF

Atributo del producto
Valor de atributo
Fabricante:
Analog Devices Inc.
Categoria de producto:
Controladores de voltaje intercambiables en caliente
RoHS:
Y
Producto:
Controladores e interruptores
Límite actual:
Programable
Voltaje de suministro - Máx:
16.5 V
Voltaje de suministro - Min:
2.5 V
Número de canales:
1 Channel
Corriente de suministro de funcionamiento:
1 mA
Temperatura mínima de funcionamiento:
- 40 C
Temperatura máxima de funcionamiento:
+ 85 C
Estilo de montaje:
SMD / SMT
Paquete / Caja:
MSOP-10
Embalaje:
Tubo
Detección de falla de energía:
No
Serie:
LTC4211
Marca:
Dispositivos analógicos
Voltaje de entrada / suministro - Máx:
16.5 V
Voltaje de entrada / suministro - Mín .:
2.5 V
Tipo de producto:
Controladores de voltaje intercambiables en caliente
Cantidad de paquete de fábrica:
50
Subcategoría:
PMIC: circuitos integrados de administración de energía
Tags
LTC4211IM, LTC4211I, LTC4211, LTC421, LTC42, LTC4, LTC
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    V***k
    V***k
    RU

    I ordered the fourth one, i changed all the table lamps to a diode tape, from such a barrel of power, shine perfectly.

    2019-04-05
    J***s
    J***s
    ES

    Works properly

    2019-05-01
    E**q
    E**q
    HU

    good

    2019-09-19
***ear Technology
LTC4211 - Hot Swap Controller with Multifunction Current Control
***p One Stop Global
Hot Swap Controller 1-CH 16.5V 10-Pin MSOP
***nell
IC, HOT SWAP CONTROLLER, 18V, MSOP-10
***i-Key
IC HOT SWAP CTRLR GP 10MSOP
***ponent Distributors Inc.
Hot Swap Controller w/Active Limit
***hardson RFPD
POWER MANAGEMENT IC
***ment14 APAC
IC, HOT SWAP CONTROLLER, 18V, MSOP-10; C; IC, HOT SWAP CONTROLLER, 18V, MSOP-10; Controller Applications:Electronic Circuit Breaker, Hot Board Insertion/Removal, Industrial High Side Switch/Circuit Breaker; Input Voltage:17V; Internal Switch:No
***ark
Hot Swap Controller IC; Controller Type:Hot Swap; Input Voltage Primary Max:17V; Output Voltage Max:17V; Output Current Max:50mA; Output Type:Open-Drain; Controlled Voltage Max:16.5V; Fault Output:Active Low; Supply Voltage Min:2.5V ;RoHS Compliant: Yes
***log Devices
The LTC4211 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal highside switch driver controls the gate of an external N-channel MOSFET for supply voltages ranging from 2.5V to 16.5V. The LTC4211 provides soft-start and in rush current limiting during the start-up period which has a programmable duration. Two on-chip current limit comparators provide dual level overcurrent circuit breaker protection. The slow comparator trips at VCC – 50mV and activates in 20µs (or programmed by an external filter capacitor, MS only). The fast comparator trips at VCC – 150mV and typically responds in 300ns. The FB pin monitors the output supply voltage and signals the RESET output pin. The ON pin signal turns the chip on and off and can also be used for the reset function. The MS package has FAULT and FILTER pins to provide additional functions like fault indication, autoretry or latch-off modes, programmable current limit response time and programmable overvoltage protection using an external Zener diode clamp. Applications Electronic Circuit Breaker Hot Board Insertion and Removal (Either On Backplane or On Removable Card) Industrial High Side Switch/Circuit Breaker
Power Management ADI SLP
Imagen Parte # Descripción
ADA4084-4ACPZ-R7

Mfr.#: ADA4084-4ACPZ-R7

OMO.#: OMO-ADA4084-4ACPZ-R7

Operational Amplifiers - Op Amps Quad 30V R/R I/O LowPower OpAmp
AD8601ARTZ-REEL7

Mfr.#: AD8601ARTZ-REEL7

OMO.#: OMO-AD8601ARTZ-REEL7

Precision Amplifiers RRIO SGL w/ Low Offset VTG
CSD16413Q5A

Mfr.#: CSD16413Q5A

OMO.#: OMO-CSD16413Q5A

MOSFET N-Ch NexFET Power MOSFETs
SC4215ASTRT

Mfr.#: SC4215ASTRT

OMO.#: OMO-SC4215ASTRT

LDO Voltage Regulators VRYLW INPT/DRPOUT 2AMP REG W/E
ERJ-3EKF1001V

Mfr.#: ERJ-3EKF1001V

OMO.#: OMO-ERJ-3EKF1001V

Thick Film Resistors - SMD 0603 1Kohms 1% AEC-Q200
BLM21PG300SN1D

Mfr.#: BLM21PG300SN1D

OMO.#: OMO-BLM21PG300SN1D

Ferrite Beads 0805 30 OHM
DC536A-B

Mfr.#: DC536A-B

OMO.#: OMO-DC536A-B

Power Management IC Development Tools LTC4211 Demoboard - Hot Swap Controller
ADA4084-4ACPZ-R7

Mfr.#: ADA4084-4ACPZ-R7

OMO.#: OMO-ADA4084-4ACPZ-R7-ANALOG-DEVICES-INC-ADI

Precision Amplifiers Quad 30V R/R I/O LowPower OpAmp
AD8601ARTZ-REEL7

Mfr.#: AD8601ARTZ-REEL7

OMO.#: OMO-AD8601ARTZ-REEL7-ANALOG-DEVICES

Nuevo y original
EVP-AA602W

Mfr.#: EVP-AA602W

OMO.#: OMO-EVP-AA602W-PANASONIC

Tactile Switches Swtch Lite Touch SMD 1.7mm ht J-bent 3.5N
Disponibilidad
Valores:
Available
En orden:
1984
Ingrese la cantidad:
El precio actual de LTC4211IMS#PBF es solo de referencia, si desea obtener el mejor precio, envíe una consulta o envíe un correo electrónico directo a nuestro equipo de ventas [email protected]
Precio de referencia (USD)
Cantidad
Precio unitario
Ext. Precio
1
7,13 US$
7,13 US$
25
4,73 US$
118,25 US$
100
3,91 US$
391,00 US$
250
3,71 US$
927,50 US$
500
3,63 US$
1 815,00 US$
1000
3,49 US$
3 490,00 US$
Debido a la escasez de semiconductores a partir de 2021, el precio inferior es el precio normal antes de 2021. Envíe una consulta para confirmar.
Empezar con
Nuevos productos
  • Artix-7 FPGA
    Xilinx's Artix®-7 FPGA DC and AC characteristics are specified in commercial, extended, industrial, expanded (-1Q), and military (-1M) temperature ranges.
  • Scotch-Weld™ Threadlocker
    3M™ Scotch-Weld™ threadlocker is a one-component anaerobic adhesive engineered to provide different strengths, temperatures, nut/bolt sizes, and more.
  • Compare LTC4211IMS#PBF
    LTC4211IMS vs LTC4211IMSPBF vs LTC4211IMSTRPBF
  • AB Series Thermistors
    Amphenol Advanced Sensors' AB series thermistors are useful in a wide variety of internal body temperature monitoring.
  • Resistive Touch Screen Electronics
    The MicroTouch™ SC series controllers from 3M provide the solution needed for long term viability.
  • PanelSafe™ Lockout System
    The PanelSafe™ lockout system from 3M™ prevents the movement of breaker handles from the OFF position to the ON position with energy-isolating lockout pins.
Top