TLK2501IRCPR

TLK2501IRCPR
Mfr. #:
TLK2501IRCPR
Descripción:
Ethernet ICs 1.5 to 2.5 Gbps Transceiver
Ciclo vital:
Nuevo de este fabricante.
Ficha de datos:
TLK2501IRCPR Ficha de datos
Entrega:
DHL FedEx Ups TNT EMS
Pago:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Más información:
TLK2501IRCPR más información TLK2501IRCPR Product Details
Atributo del producto
Valor de atributo
Fabricante:
Instrumentos Texas
Categoria de producto:
Circuitos integrados de Ethernet
RoHS:
Y
Serie:
TLK2501
Producto:
Transceptores Ethernet
Número de transceptores:
1 Transceiver
Velocidad de datos:
1.5 Gb/s
Voltaje de suministro operativo:
2.5 V
Temperatura mínima de funcionamiento:
- 40 C
Temperatura máxima de funcionamiento:
+ 85 C
Estilo de montaje:
SMD / SMT
Paquete / Caja:
HVQFP-64
Embalaje:
Carrete
Altura:
0.8 mm
Longitud:
10 mm
Ancho:
10 mm
Marca:
Instrumentos Texas
Corriente de suministro - Máx .:
145 mA
Kit de desarrollo:
TLK2501EVM
Sensible a la humedad:
Yes
Tipo de producto:
Circuitos integrados de Ethernet
Cantidad de paquete de fábrica:
1000
Subcategoría:
Circuitos integrados de comunicación y redes
Voltaje de suministro - Máx:
2.7 V
Voltaje de suministro - Min:
2.3 V
Unidad de peso:
0.008004 oz
Tags
TLK2501I, TLK2501, TLK250, TLK25, TLK2, TLK
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***as Instruments
1.5 to 2.5 Gbps Transceiver 64-HVQFP -40 to 85
***p One Stop Global
Transceiver 1TX 1RX 2.5Gbps 64-Pin HVQFP EP T/R
***ser
Serializers and Deserializers 1.5 to 2.5 Gbps Transceiver
***et Europe
PHY 1-CH 64-Pin HVQFP EP T/R
***ark
IC, GIGABIT TRANSCEIVER, HVQFP-64
*** Source Electronics
IC TRNSCVR 1.5-2.5GBPS 64-HVQFP
***as Instr.
The TLK2501 is a member of the transceiver family of multigigabit transceivers used in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2501 supports an effective serial interface speed of 1.5 Gbps to 2.5 Gbps, providing up to 2 Gbps of data bandwidth. The TLK2501 is pin-for-pin compatible with the TLK2500. The TLK2501 is both pin-for-pin compatible with and functionally identical to the TLK1501, a 0.6 to 1.5 Gbps transceiver, and the TLK3101, a 2.5 to 3.125 Gbps transceiver, providing a wide range of performance solutions with no required board layout changes.
***ASI
The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 . The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
***AS USD
This device can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector terminals, and transmit/receive terminals. Parallel data loaded into the transmitter is delivered to the receiver over a serial channel, which can be a coaxial copper cable, a controlled impedance backplane, or an optical link. It is then reconstructed into its original parallel format. It offers significant power and cost savings over current solutions, as well as scalability for higher data rate in the future.
***AS USD
The TLK2501 performs data conversion parallel-to-serial and serial-to-parallel. The clock extraction functions as a physical layer interface device. The serial transceiver interface operates at a maximum speed of 2.5 Gbps. The transmitter latches 16-bit parallel data at a rate based on the supplied reference clock (GTX_CLK). The 16-bit parallel data is internally encoded into 20 bits using an 8-bit/10-bit (8B/10B) encoding format. The resulting 20-bit word is then transmitted differentially at 20 times the reference clock (GTX_CLK) rate. The receiver section performs the serial-to-parallel conversion on the input data, synchronizing the resulting 20-bit wide parallel data to the extracted reference clock (RX_CLK). It then decodes the 20 bit wide data using 8-bit/10-bit decoding format resulting in 16 bits of parallel data at the receive data terminals (RXD0-15). The outcome is an effective data payload of 1.20 Gbps to 2.0 Gbps (16 bits data x the GTX_CLK frequency).
***as Instruments (TI)
The TLK2501 is housed in a high performance, thermally enhanced, 64-pin VQFP PowerPAD package. Use of the PowerPAD package does not require any special considerations except to note that the PowerPAD, which has an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is recommended that the TLK2501 PowerPAD is soldered to the thermal land on the board. All ac performance specifications in this data sheet are measured with the PowerPAD soldered to the test board.
***AS INSTRU
The TLK2501 provides an internal loopback capability for self-test purposes. Serial data from the serializer is passed directly to the deserializer, allowing the protocol device a functional self-check of the physical interface.
***AS INS
The TLK2501 is designed to be hot plug capable. An on-chip power-on reset circuit holds the RX_CLK low during power up. This circuit also holds the parallel side output signal terminals as well as DOUTTXP and DOUTTXN in a high-impedance state during power up.
***AS INST
The TLK2501 has a loss of signal detection circuit for conditions where the incoming signal no longer has a sufficient voltage amplitude to keep the clock recovery circuit in lock.
***NS
To prevent a data bit error from causing a data packet from being interpreted as a comma and thus causing the erroneous word alignment by the comma detection circuit, the comma word alignment circuit is turned off after the link is properly established in TLK2501.
***AS INSTRUMENT
The TLK2501 allows users to implement redundant ports by connecting receive data bus terminals from two TLK2501 devices together. Asserting the LCKREFN to go to a low state causes the receive data bus terminals, RXD[0:15], RX_CLK and RX_ER, RX_DV/LOS to go to a high-impedance state. This places the device in a ransmit-only mode since the receiver is not tracking the data.
***ASI
The TLK2501 uses a 2.5-V supply. The I/O section is 3 V compatible. With the 2.5-V supply the chipset is very power-efficient, consuming less than 360 mW typically. The TLK2501 is characterized for operation from –40°C to 85°C.
Parte # Descripción Valores Precio
TLK2501IRCPR
DISTI # V98:2334_07387385
High-Performance Transceiver
RoHS: Compliant
997
  • 500:$17.2500
  • 250:$20.8000
  • 100:$21.9100
  • 25:$24.6400
  • 10:$25.7300
  • 1:$27.9400
TLK2501IRCPR
DISTI # TLK2501IRCPR-ND
IC TRNSCVR 1.5-2.5GBPS 64-HVQFP
RoHS: Compliant
Min Qty: 1000
Container: Tape & Reel (TR)
Temporarily Out of Stock
  • 1000:$16.4827
TLK2501IRCPRG4
DISTI # TLK2501IRCPRG4-ND
IC TRNSCVR 1.5-2.5GBPS 64HVQFP
RoHS: Compliant
Min Qty: 1000
Container: Tape & Reel (TR)
Temporarily Out of Stock
  • 1000:$16.4827
TLK2501IRCPR
DISTI # 27555447
High-Performance Transceiver
RoHS: Compliant
997
  • 500:$17.2500
  • 250:$20.8000
  • 100:$21.9100
  • 25:$24.6400
  • 10:$25.7300
  • 1:$27.9400
TLK2501IRCPR
DISTI # TLK2501IRCPR
PHY 1-CH 64-Pin HVQFP EP T/R (Alt: TLK2501IRCPR)
RoHS: Compliant
Min Qty: 1000
Container: Tape and Reel
Europe - 2000
  • 1000:€20.1900
  • 2000:€18.2900
  • 4000:€16.5900
  • 6000:€15.8900
  • 10000:€15.2900
TLK2501IRCPR
DISTI # TLK2501IRCPR
PHY 1-CH 64-Pin HVQFP EP T/R (Alt: TLK2501IRCPR)
RoHS: Compliant
Min Qty: 1000
Container: Tape and Reel
Asia - 0
    TLK2501IRCPR
    DISTI # TLK2501IRCPR
    PHY 1-CH 64-Pin HVQFP EP T/R - Tape and Reel (Alt: TLK2501IRCPR)
    RoHS: Compliant
    Min Qty: 1000
    Container: Reel
    Americas - 0
    • 1000:$18.3900
    • 2000:$17.4900
    • 4000:$16.8900
    • 6000:$16.2900
    • 10000:$15.8900
    TLK2501IRCPRG4
    DISTI # TLK2501IRCPRG4
    PHY 1-CH 64-Pin HVQFP EP T/R - Tape and Reel (Alt: TLK2501IRCPRG4)
    RoHS: Compliant
    Min Qty: 1000
    Container: Reel
    Americas - 0
    • 1000:$18.3900
    • 2000:$17.4900
    • 4000:$16.8900
    • 6000:$16.2900
    • 10000:$15.8900
    TLK2501IRCPRG4
    DISTI # TLK2501IRCPRG4
    PHY 1-CH 64-Pin HVQFP EP T/R (Alt: TLK2501IRCPRG4)
    RoHS: Compliant
    Min Qty: 1000
    Container: Tape and Reel
    Asia - 0
      TLK2501IRCP
      DISTI # 595-TLK2501IRCP
      Ethernet ICs 1.5 to 2.5 Gbps Transceiver
      RoHS: Compliant
      370
      • 1:$27.8700
      • 5:$26.7200
      • 10:$25.7100
      • 25:$24.5500
      • 100:$21.9500
      • 250:$20.9400
      TLK2501IRCPR
      DISTI # 595-TLK2501IRCPR
      Ethernet ICs 1.5 to 2.5 Gbps Transceiver
      RoHS: Compliant
      0
      • 1:$24.4700
      • 5:$23.4600
      • 10:$22.5700
      • 25:$21.5600
      • 100:$19.2800
      • 250:$18.3900
      • 500:$17.5000
      TLK2501IRCPRG4
      DISTI # 595-TLK2501IRCPRG4
      Ethernet ICs 1.5 to 2.5 Gbps Transceiver
      RoHS: Compliant
      0
      • 1000:$17.5000
      TLK2501IRCPG4
      DISTI # 595-TLK2501IRCPG4
      Ethernet ICs 1.5 to 2.5 Gbps Transceiver
      RoHS: Compliant
      0
      • 160:$21.9500
      • 320:$20.9400
      TLK2501IRCPR
      DISTI # C1S746200134412
      Transceiver 1TX 1RX 2.5Gbps 64-Pin HVQFP EP T/R
      RoHS: Compliant
      997
      • 250:$21.0300
      • 100:$22.2300
      • 25:$24.8900
      • 10:$26.0000
      • 1:$28.2000
      Imagen Parte # Descripción
      TLK2501EVM

      Mfr.#: TLK2501EVM

      OMO.#: OMO-TLK2501EVM-TEXAS-INSTRUMENTS

      EVALUATON MOD FOR TLK2501
      Disponibilidad
      Valores:
      Available
      En orden:
      4500
      Ingrese la cantidad:
      El precio actual de TLK2501IRCPR es solo de referencia, si desea obtener el mejor precio, envíe una consulta o envíe un correo electrónico directo a nuestro equipo de ventas [email protected]
      Precio de referencia (USD)
      Cantidad
      Precio unitario
      Ext. Precio
      1
      24,47 US$
      24,47 US$
      5
      23,46 US$
      117,30 US$
      10
      22,57 US$
      225,70 US$
      25
      21,56 US$
      539,00 US$
      100
      19,28 US$
      1 928,00 US$
      250
      18,39 US$
      4 597,50 US$
      500
      17,50 US$
      8 750,00 US$
      Empezar con
      Nuevos productos
      • bq25700A Battery Buck-Boost Charge Controller
        OMO Electronic offers the bq25700A SMBus multi-chemistry battery buck-boost charge controller with system power monitor and processor hot monitor.
      • TMUX1208 Analog Multiplexer (Mux)
        OMO Electronic' TMUX1208 general purpose analog mux reduces system complexity and board size in a wide variety of applications including building automation.
      • TPD3S014/44 Current Limit Switch
        OMO Electronic' TPD3S014/44’s are integrated devices that feature a current limited load switch and a two channel Transient Voltage Suppressor (TVS).
      • OPA388 Operational Amplifier
        OMO Electronic' OPA388 precision op-amp provides rail-to-rail input output operation in a low-noise, zero-drift, zero-crossover device.
      • Compare TLK2501IRCPR
        TLK2501IRCP vs TLK2501IRCPG4 vs TLK2501IRCPR
      • TLV9052 RRIO Op-Amp
        OMO Electronic' TLV9052 5 MHz, low-power, RRIO op-amp offers an ultra-high slew rate and low supply current per channel providing excellent AC performance.
      Top