By Honeywell Sensing and Productivity Solutions T&M 102
Honeywell's basic amplified ABP series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full-scale pressure span and temperature range.
The ABP series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability, and hysteresis) using an on-board application specific integrated circuit (ASIC).
Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The ABP series is calibrated over the temperature range of 0°C to 50°C (32°F to 122°F). The sensor is characterized for operation from a single power supply of either 3.3 VDC or 5.0 VDC. These sensors measure gauge and differential pressures.
The basic amplified pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.
Features | ||
|
|
nuevos productos:
ABPLLNT010BGAA5ABPDANT015PGAA5ABPMANN005PGAA3ABPDANN005PG2A3ABPMANN004BGAA5ABPMANN030PG2A3ABPDANT005PGAA5ABPMAND001PG2A3ABPDRRT005PG2A5ABPMJJT015PGAA5ABPMLNN001PGAA3ABPDJJT001PGAA5ABPLLNN600MGAA3ABPDLNN100MG2A3ABPLANN001PG2A5ABPLLND060MGAA3ABPLNNV100PG2T3ABPLLNV600MG0S3ABPMRNN060KGSA3ABPMANN060KGSA3